Is Thompson WaterSeal oil based

Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

What is Thompsons Water Seal made of?

Propane000074-98-6200-827-9Butane000106-97-8203-448-7Solvent naphtha, petroleum, medium aliphatic064742-88-7265-191-7Distillates, petroleum, hydrotreated heavy paraffinic064742-54-7265-157-1Solvent naphtha, petroleum, light aromatic064742-95-6265-199-0

Is Thompson's Water Seal latex based?

Thompson’s WaterSeal Total All-in-One Stain and Sealer Solid | Total All-in-One Solid This unique latex & oil blend beautifies and revives the wood’s appearance, while waterproofing with a film-forming barrier. Solid opacity adds he most color and shows the least amount of wood grain.

Is Thompson water Seal solvent based?

Thompson’s Waterseal Smooth Clear Solvent-Based Multi-Surface Waterproofer 1.2 gal. Proven to waterproof wood, concrete and brick. Use as a wood sealer, brick sealer or for concrete waterproofing.

Is Thompson Concrete Sealer water based?

We’ve always used Thompson’s water sealer on our deck. It’s very easy to apply, you can’t make a mistake using this product and it will make your deck last forever! This time we noticed the product has a white milky color, it’s always been clear. It turns out the product is now water based, no longer solvent based.

Does Thompson's Water Seal contain silicone?

Thompson’s Water Seal, offers superb weather protection for bricks, mortar, stone & concrete. Its advanced silicone micro emulsion soaks in deep to provide long lasting protection against rain damage.

Can I use Thompson's Water Seal over oil based stain?

Yes, you can use a water-based sealer such as Thompson’s Water Seal over an oil-based stain as long as you prepare the surface accordingly. Start by allowing the wood to dry thoroughly, then wipe it down with a clean, lint-free cloth dampened with a mixture of denatured alcohol and water.

Can Thompson's Water Seal be applied with a sprayer?

The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. … Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.

Does Thompson Water Seal peel?

– As far as we can tell, Thompson’s® WaterSeal® does not prevent UV graying at all. This is a huge disappointment as preventing UV graying is the number one reason to stain your exterior wood and decking. – Thompson’s® WaterSeal® penetrates deep into the wood. There was no peeling or wearing.

Is Thompson's Water Seal non toxic?

Seal-Once is non-flammable, non toxic and is harmless to humans, animals and plants. Seal-Once contains no VOCs or petroleum distillates.

Article first time published on

Is Thompson water Seal acrylic?

Thompsons WaterSeal Deck & House 100 Percent Acrylic Latex Waterproofing Solid Stain, Russet 16141-Old Product. … Thompsons WaterSeal Deck & House Stains prevent water damage and provide a coating that resists mildew and UV damage. These one-coat stains are long-lasting and scuff resistant.

Does Thompson water Seal darken wood?

Thompson’s® WaterSeal® Waterproofing Wood Protector – Clear doesn’t change the color of the wood. Transparent deck stain adds a hint of color and shows the most wood grain.

What type of sealer is Thompson's water Seal?

Clear – Waterproofing Wood Protector. Wood sealer that provides long-lasting outdoor wood protection. It waterproofs long after the initial water beading is gone.

How good is Thompson water Seal on concrete?

When applied to fresh concrete, the product shortens the curing time and makes the concrete up to 250 percent stronger. You can also apply Thompson’s WaterSeal to hardened concrete to seal out moisture. The application procedure is the same, but hardened concrete may need cleaning first.

How do you remove Thompson's water Seal from concrete?

Steps to Remove the Sealant: To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product.

Can you put water based sealer over oil based sealer?

And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain. … The beauty of all our water-based sealers and topcoats is that they’ll level and adhere to whatever solvent- or oil-based stain you’ve used.

Can you use a water based sealer over a solvent based sealer?

If it was a water-based sealer, then you can safely reseal using either a solvent-based or water-based sealer. If a solvent-based sealer was originally used, you’ll want to reseal using a solvent-based sealer. A water-based sealer cannot be applied on top of a solvent-based sealer.

Can water based Poly go over oil based?

Answer: In most cases, it is OK to use a water-based polyurethane over an oil-based finish in good condition. You should remove grease, dirt and wax by scrubbing the surface with a wood prep/cleaner/de-glosser, or mineral spirits and synthetic steel wool. … Apply the new water-based finish per label directions.

How many years does Thompson's water Seal last?

If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

Why is my Thompson water Seal sticky?

High humidity means there is a lot of moisture suspended in the atmosphere. This kind of situation impedes drying by making it difficult for the solvent particles in your sealant to escape into the air. … However, sometimes it might have sticky residue for an entire week if the humidity is significantly high.

Why is my Thompson water Seal white?

If you have white spots in the concrete there is probably water under the water coat. Maybe if the sun dries it out and the white spots go away you could try applying another coat. I would have tried DRYLOK Latex Water Proofer on your patio, I use this product on my concrete steps.…

Can Thompson's Water Seal be thinned?

The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson’s Water Seal cut with 1 part paint thinner. … The paint thinner acts as a penetrating agent, making the mixture thin enough so that the active ingredients penetrate the wood.

Can you use Thompson Water Seal on pressure treated wood?

Some, like Thompson’s® WaterSeal® Waterproofing Wood Protector, recommend waiting 30 days before application on new pressure treated lumber. Other products, like Thompson’s® WaterSeal® Waterproofing Stain, can be applied immediately to new pressure treated lumber.

Does Thompson's Water Seal have UV protection?

Thompson’s WaterSeal Wood Protector The water-based sealer contains UV blockers and also protects decks from mold and mildew damage, so it’s an optimal choice in humid and rainy areas.

How do you remove Thompson's water Seal from wood?

Remove the product with a real wood striper, i used “Super remover” this product can dissolve about anything, wear gloves and glasses. …
Use a green abrasive pad with “Super remover” and scrub the surface.
Sand the surface.

Is Olympic Waterguard oil based?

A durable acrylic oil wood stain that provides protection, while allowing a slight hint of color that highlights the wood grain.

Is Thompson water Seal a good product?

Thompsons WaterSeal Advanced Natural Wood Protector – Editor’s Choice and The Best Outdoor Sealer for Wood. Thompson’s WaterSeal Advanced is a maximum strength waterproofer and natural wood protector. The coating resists mildew growth, UV damage, and fading. It’s perfect for natural wood decks, fences, and furniture.

Can you apply Thompson Water Seal with a rag?

Use a dry microfiber cloth or rag to clean the surface. Keep in mind that using a damp microfiber cloth to clean the surface of an unfinished wood could warp. Add a drop of water on the surface to determine whether your wood is finished or unfinished.

Is Thompson Water Seal safe for vegetable gardens?

Yes, you can use the Thompson’s if you wish but it is a fair amount of added expense and work for little gain. You will get some leaching of its chems into the soil in the first year so don’t plant root crops right up next to it. … use a mix of ingredients – compost, composted manures, local dirt, etc.

Is Thompson Water Seal toxic to birds?

Yes, Flex Seal liquid is safe to repair your bird bath with, once it’s been fully cured that is.

How long does marine seal last?

Clear formula allows wood to age naturally without decay, morphing to a rich silver-gray over time. Seal-Once Marine, when tinted as a wood stain, gives added UV protection from sun rays. Prevents long-standing water accumulation for up to 10 years on vertical & 6 years on horizontal surfaces.