What do you use a socket on

It’s used mostly for loosening and tightening fasteners such as nuts and bolts. The socket is placed on the square extension or driver of the ratchet. Once it’s secured to the ratchet the user can loosen or tighten a bolt or nut while the socket remains in place by just turning the handle of the ratchet.

What do you need a socket set for?

A socket set is designed to help mechanics loosen, tighten and remove any nuts or bolts that are in a vehicle or machine.

What is the most common socket drive size?

⅜-inch drive size sockets are the most common and most available.

What goes on a socket wrench?

A socket wrench is most commonly a handle with a 90 degree ratchet, along with a set of cylinder shaped “sockets” of various sizes. The sockets fit onto the ratchet by way of a square nub. You can set the ratchet to either tighten or loosen, then keep the socket in place on the nut while you turn the handle.

What are sockets in Australia?

In Australia the power plugs and sockets are of type I. The standard voltage is 230 V and the standard frequency is 50 Hz.

Do all ratchets fit all sockets?

Quality ratchets can be serviced inexpensively and so should never wear out. Sockets are interchangeable because they are all standard. Buy the best ratchet you can afford, even if you buy inexpensive sockets to start with.

How do you unscrew a socket wrench?

Attach the socket to the head of the wrench – you should hear a click when its properly in place. Select the direction using the flip switch to decide between loosening and tightening. Place the socket on the nut. Twist it back in the opposite direction and repeat until the bolt is fully loosened or tightened.

How many teeth should a good ratchet have?

A lot of common coarse ratchets sport 36 teeth, which gives you a 10-degree swing arc. Fine, or high-tooth-count, ratchets range from about 72 teeth to 160 teeth.

What order do sockets go in?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

How do you remove a bolt you can't reach the nut?

Step 1: Use Some Muscle. Try a 6-point wrench or socket on your seized nut/bolt. Start by rocking the bolt by tightening then loosing, this may be all you need to break through the rust. Try and avoid 12-point wrenches and sockets as they likely to slip and strip the bolt head.

Article first time published on

What is the difference between a wrench and a socket wrench?

Instead of needing a separate wrench for each size fastener, only a separate socket is needed. The ratcheting mechanism of a socket wrench makes the task of tightening or loosening nuts faster and easier compared to a conventional wrench. This feature is particularly advantageous when working in cramped spaces.

Why do Australian outlets have switches?

Why Do Australian Power Points Have Switches? Australia has adopted switched sockets because they are safer. By flipping the switch to the ‘OFF’ position, you can prevent the current from flowing. This allows children to interact with sockets without suffering any dangerous shocks.

Is New Zealand plug same as Australia?

New Zealand’s electricity supply runs at 230/240 volts, and we use angled two or three pin plugs (the same as Australia and parts of Asia).

Are Chinese and Australian plugs the same?

You can use your electric appliances in China, because the standard voltage (220 V) is (more or less) the same as in Australia (230 V). … So you don’t need a voltage converter in China, when living in Australia.

Can you use sockets on cordless screwdriver?

Electric screwdrivers However, you will need a ‘hex to square drive’ adaptor if you want to use an electric screwdriver with a socket. Due to their small size and limited power, electric screwdrivers are not capable of delivering a lot of torque to a fastener in comparison with other powered turning tools.

What is a socket drive adapter?

Socket adapters are used with sockets and hand drive tools to tighten and loosen fasteners. They allow the drive end of a socket to fit a hand drive tool having a different drive size or shape. Socket adapter sets have an assortment of adapters for a range of hand drive and socket drive sizes.

Can regular sockets be used with an impact wrench?

Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they’re made from.

Can I use pliers instead of a wrench?

A plier tool can be used instead of a wrench sometimes , like to tighten or loosen nuts but this job is better suited for a wrench. Pliers tools tend to damage the corner or the surface of the nuts and it is more difficult to use than a normal sized wrench.

Whats bigger 3/8 or 1/2 socket?

If your socket set is limited to one drive size, choose 3/8-inch drive to cover the majority of sockets you will use. … Large, ½-inch drive sockets can handle more torque and are ideal for larger fasteners that require a longer ratchet or breaker bar to loosen or fully tighten.

What type of sockets are the most commonly used?

Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.

What is a quick release ratchet?

These ratchets typically have a lockable ball detent that requires a press on the back of the ratchet head to release a socket. An accidental push of the release button can result in unpleasant consequences if a socket then falls into a busy workspace, such as an engine bay.

How many points is a socket?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.