What is a primary gas meter

primary meter . ( 主錶) means a meter connected to a service pipe for ascertaining the quantity of gas supplied through such pipe, but does not include a secondary meter; Sample 1.

What is a secondary gas meter?

“secondary meter” means a meter, other than a primary meter, for ascertaining the quantity of gas provided by a person for use by another person.

What are the different types of gas meters?

They generally come in two different types; either metric or imperial, with metric generally having five main numbers and imperial having only four main numbers. A metric gas meter will also feature a decimal point to the right of the main numbers that states the part units that have been used.

Where is the gas meter control valve?

A) located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.

Can I fit a secondary gas meter?

2 Answers from MyBuilder Gas Engineers If you own both flats you can add a secondary meter.As long as it is installed with its own ECV and governor and adheres to current installation regs.

Why do I have two gas meters?

It is commonplace for two meters to be attributed to apartments in NSW. One of these meters will register your gas consumption, and the other will register your hot water consumption.

How far can a gas meter be from the ECV?

The ECV is normally positioned within two metres of the gas meters or within visual sight of the meter. If this is not the case, there is a legal requirement for the next engineer passing gas through the installation to make it clear via labelled instructions where the gas should be turned off in the event of danger.

Does a gas meter need ventilation?

Ideally meters should be located in an approved built-in or semi-concealed meter box, on the wall closest to the gas main. … Where a meter is to be located inside the building then it must be located in a ventilated cupboard, as close as practicable to an external, above ground service entry point.

What is a U6 gas meter?

U6 SC6 The U6/G4 is designed to meter gas usage from pilot light to central heating loads. The U6 is compact, with connection centres at 152 mm (6”), highly reliable, and built to the highest quality standards. … Manchester has a long association with the manufacture of Gas meters.

Do I need a gas solenoid valve?

A solenoid valve is used because, in most gas piping applications, it is required to stop the flow of gas in the system in the event of a gas leak. This is one of the main functions of an electronically operated solenoid valve whereby the operator may no longer be able to use gas when there is a gas leak.

Article first time published on

What is a gas regulator?

A gas pressure regulator is a control device that maintains a defined pressure of a system by cutting off the flow of a gas or liquid when it reaches a set pressure. Pressure regulators come in several types and configurations and they provide control in a variety of applications in oil and gas processing.

How do I know if my gas meter is metric?

Check what type of meter you have. If it is an old imperial meter, measuring gas in cubic feet, it will probably have the words ‘cubic feet’, or the letters ‘Ft’ shown somewhere on the front. If it is a newer metric meter, it will probably say it measures gas in ‘cubic meters’, or will have the letter ‘M’ on the front.

Who pays for a replacement gas meter?

Who pays for gas meter replacement? The cost of replacing a meter may be free, but this depends on your energy supplier. There could be a small admin charge but there is no reason why you would be charged for a required piece of equipment.

How do I know which gas meter I have?

Gas meters can be identified by looking at the display panel. Meters often carry a meter serial number and details of its capacity, and measurement class on the fascia.

Is a U16 gas meter commercial?

U16 gas Meter Capacity kW A U16 is a small diaphragm meter generally used for commercial applications and occasionally for domestic properties.

Where should gas meters be located UK?

Where should my gas meter be located? There are regulations around the installation of your new meter which must be adhered to. But in general terms, the ideal location for a gas meter is on an external wall that’s no more than 2 meters from the corner of the property on either side of a door or sealed window.

Are there smart gas meters?

Smart meters are next-generation gas and electricity meters, and as well as being available at no upfront cost, they offer a number of benefits over traditional meters: Automatic meter readings. You get one meter for gas and one for electricity – they’ll usually go where your existing meters are.

Can a gas engineer move a gas meter?

Can I move my gas or electric meter myself? No, moving gas meters is a difficult process, so it’s not something you can do yourself. It’s illegal for anyone but a qualified, licensed professional – such as a Gas Safe engineer – to change the meter’s position.

Who owns the gas meter in my house?

Gas meter boxes can be installed by the homeowner before the supplier installs the supply, or the gas supplier might install the meter box through some agreement with the consumer. However, once the meter box is installed it appears that the consumer (usually the property owner) is responsible for its maintenance.

How do I find my NMI number without a bill?

Where do I find my NMI? You can find your NMI on your electricity bill. If you don’t have an electricity bill handy, you can call Ergon Energy Network on 13 74 66 or your current electricity retailer to ask for your NMI.

How do you know if you have a smart meter?

Smart meters have a white face, with an LCD display, short for liquid crystal display, which is similar to the display used in digital watches and many portable computers and televisions. If you still have a meter reader visiting your house to take regular readings then you don’t yet have a smart meter.

What is a U25 gas meter?

A U25 is a medium size diaphragm meter generally used for commercial applications and occasionally for domestic properties. The U number is used to define all Diaphragm Gas Meters and relates to the meter capacity in Standard Cubic Metres per Hour (SCMH).

What is the permissible drop on a U6 gas meter?

Table 1MeterPipework diameterMaximum pressure dropNo meter – pipework only with ECV/AECV<35mm15 mbarDiaphragm – U6/G4<35mm15 mbarDiaphragm – U16/G10<35mm0.5 mbar

Can I enclose my gas meter?

Meter banks can be fully enclosed, as long as utility workers have direct access and proper ventilation is added to meet code requirements. Floor must be dirt for access.

Can I cover my gas meter box?

Whether you want to hide the gas meter in front of your house, or simply disguise a gas meter box at your property, painting your gas meter box is a quick, easy and cost-effective solution. You’ll be surprised at how effective a lick of paint can be at helping your meter box blend into the cladding of the house.

Where is the gas valve in my house?

Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe.

What happens when gas is shut off?

The main gas service shutoff valve can be turned on in an emergency. If you smell gas, see a broken gas line, or suspect a gas leak, don’t shut off the gas. If you shut off the gas, it may take a while for the service to come back on.

Can I turn my gas back on myself?

Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.

What does a gas solenoid do?

Gas solenoid valves are used to control the flow of a gas through a machine or in a boiler or industrial heating application, by translating electrical impulses. These impulses open and close a valve, controlling the flow of the gas.

How does gas solenoid work?

Gas Solenoid Valves are made of parts that receive electrical impulses that then translate those impulses into mechanical movements. When an electrical impulse is received, by the Gas Solenoid Valve, it will open or close the valve. Thus controlling the flow of gas into a chamber or through a line.

Why do you need a gas regulator?

Why do we Need a Regulator on Natural Gas Systems Gas regulators are needed at both LPG or propane gas fueled appliances and at natural gas fueled appliances to assure a smooth delivery of fuel at the pressure and flow rate required by the heater or appliance.